Archive for AudiSRS.com The place for Performance Audi
 


       AudiSRS.com Forum Index -> Projects and Builds
Nez

Another Widebody S4 Saloon :)

It's official  started  

The car is in the garage with Aiden www.Bahnstorm.net   I drop the car on 8th march 2010 so it has been almost one week now.

My plans are   Bodywork first, then engine, and finally the suspension.

I dreamed of having a B5 RS4 but I really didn't like the Avan so I always wanted to have a RS4 in a saloon and now I think that dream would become real  

Body Work plan:

OEM B5 RS4 Panels
OEM RS4 wheel liners
OEM Rear Doors
OEM Side Skirts
OEM RS4 Wing Mirror's
Complete respray (dark red)

Engine:

Nothing is in my mine yet   but maybe I go for KO4 turbo's and my plan is to get it around 450 BHP  

Here are some picture's before the car went into Aiden:





Parts:







So far the progress of the car  





I had few problems with finding the parts but now everything is completed  

OK once I get more picture from Aiden I will post it here  
Graham

What wheels are you going to use afterwards? I think it would look great with B5 RS4 alloys, the original (well you know what I mean) look suiting the rich colour of the car.
Nez

Graham wrote:
What wheels are you going to use afterwards? I think it would look great with B5 RS4 alloys, the original (well you know what I mean) look suiting the rich colour of the car.


At the moment I will keep the rims that is on the car  
Matt_D

Awesome

i reckon the widebody will really suit that colour, i assume your keeping it that colour ?
Byzan a4

These things are getting so common now.......LOL

She will look good once done Nez, the Hibiscus is a good colour
Nez

Matt_D wrote:
Awesome

i reckon the widebody will really suit that colour, i assume your keeping it that colour ?


Yes the colour will be the same  
graemep

Looking forward to seeing the end result
loomx

Awesome its going to look awesome in that colour! If it was me though I think that I would change all the chrome/silver bits to black, I think it would suit the red better.
H8CAK

Cant wait to see it in that colour. You wont be disapointed with Aidans work
BagginS4

Looking good!!!  
SJS

I see your number plate is NEZ****.  That is a Northern Ireland plate, did you bring it back across the water?

Mine went the other way
Nez

SJS wrote:
I see your number plate is NEZ****. That is a Northern Ireland plate, did you bring it back across the water?

Mine went the other way


Na man I bought the number from Northern Ireland  
Alps

Ere we go yet again. 14 a penny. At least it aint another silver one

Kiddin Can't wait to see the finished product. Especially in that colour
Ghost

Oh these are so common.

Cant wait to see the result, first one ever in this colour I think.
StumpyRS4

Nice one Nez - glad you got the last few bits you were after...

Who's next then?!

RubanS4

Thats going to look well smart once completed Nez, especially in that colour
Nez

Thanks guys for all the comen's I can't wait for the finish
MarkB

Moved to P&B forum. Coming on nicely there...
Nez

MarkB wrote:
Moved to P&B forum. Coming on nicely there...


Thanks man  
Ash25

Awesome nez, i reckon the widebody would look great in that colour.

Welcome to the widebody club!

how long do you think its going to take then? what wheels are you going with?

Good start mate, keep up with the pics.

Ash
Adam

This is going to look awesome mate, the Hibiscus will really show the lines well IMO. She is going to look phaaaat
Nez

Ash25 wrote:
Awesome nez, i reckon the widebody would look great in that colour.

Welcome to the widebody club!

how long do you think its going to take then? what wheels are you going with?

Good start mate, keep up with the pics.

Ash


Thanks man how long it takes its on hands of Aiden about the rims for now I will keep the one that is on the car 18" RS4 Rep 8J with 225/40/18 tyres then I might go for something special
Nez

Adam wrote:
This is going to look awesome mate, the Hibiscus will really show the lines well IMO. She is going to look phaaaat


I hope the colour would suit the RS4 kit once it finishs  
Nez

Just a abit of update the car now is fully painted and should be ready by this weekend
StumpyRS4

Excellent job - painted at Bahnstorm's too?
H8CAK

Some pics?
MarkB

I think I need to rename my thread... thought this was my build for a mo

Pics would be nice Nez
Ash25

cool nez, sounds like its coming along nice and quick.


now show us some pics!

Ash
Nez

StumpyRS4 wrote:
Excellent job - painted at Bahnstorm's too?


Yes painted done at Bahnstorm's  
Nez

MarkB wrote:
I think I need to rename my thread... thought this was my build for a mo

Pics would be nice Nez


Sorry Mark if you want you can change my thread name if you want    I am waiting for Aiden to send me some picuters  
MarkB

Nez wrote:
MarkB wrote:
I think I need to rename my thread... thought this was my build for a mo

Pics would be nice Nez


Sorry Mark if you want you can change my thread name if you want I am waiting for Aiden to send me some picuters


I changed mine, no worries
Nez

MarkB wrote:
Nez wrote:
MarkB wrote:
I think I need to rename my thread... thought this was my build for a mo

Pics would be nice Nez


Sorry Mark if you want you can change my thread name if you want I am waiting for Aiden to send me some picuters


I changed mine, no worries


Thanks man  
Nez

OK guys here is some more pictures



H8CAK

Looks good nez. I spy mark b's in the background
Matt_D



Looks nice, love to see the colour when finished i think widearches will suit it very nicely
Nez

H8CAK wrote:
Looks good nez. I spy mark b's in the background


Yea mark car is looking good can't wait to see his car when I pick up my one.
quattronutter

not far off now

H8CAK

No Rs arch liners ?
quattronutter

H8CAK wrote:
No Rs arch liners ?

back ones but no fronts,easy enough to fill the gap with some old liners though
H8CAK

Time for the mahooooosive spacers on the wheels now!
Ghost

Looking good.
StumpyRS4

Looking good Aiden... Nice work.
aposegil

that does look awesome
StumpyRS4

Nez where did you get you're NSF wing from?
m14rrv

he got it from brand, looks great btw
StumpyRS4

H8CAK wrote:
Time for the mahooooosive spacers on the wheels now!


The extg wheels don't look too bad as it is?  Maybe they're a low offset already?

I presume moving from an S4 to a WB you've got to use c20-25mm spacers on the same offset wheels?  Alternatively, OEM RS4 wheels with an ET 20, should sit just right...?

Nez

quattronutter wrote:
H8CAK wrote:
No Rs arch liners ?

back ones but no fronts,easy enough to fill the gap with some old liners though


Aiden I think I had the driver side arch liner? but not the passanager side  
Nez

StumpyRS4 wrote:
Nez where did you get you're NSF wing from?


Get it from brand  
Nez

StumpyRS4 wrote:
H8CAK wrote:
Time for the mahooooosive spacers on the wheels now!


The extg wheels don't look too bad as it is? Maybe they're a low offset already?

I presume moving from an S4 to a WB you've got to use c20-25mm spacers on the same offset wheels? Alternatively, OEM RS4 wheels with an ET 20, should sit just right...?



The wheel ET is 30 and at the moment its with 15mm spacers but we will go for 20mm soon
StumpyRS4

I'll get some low offset wheels rather than mahoosive spacers, but as we all know there aren't that many around to choose from...
Nez

StumpyRS4 wrote:
I'll get some low offset wheels rather than mahoosive spacers, but as we all know there aren't that many around to choose from...


Yea and they are very expensive too
Ash25

Nez wrote:
StumpyRS4 wrote:
I'll get some low offset wheels rather than mahoosive spacers, but as we all know there aren't that many around to choose from...


Yea and they are very expensive too


true. Et 20 wheels are few and far between. all depends if you want lightweight wheels or not.

Gotta say your car is looking good though.

What wheels would you be going for in the long run then?

Ash
Nez

Ash25 wrote:
Nez wrote:
StumpyRS4 wrote:
I'll get some low offset wheels rather than mahoosive spacers, but as we all know there aren't that many around to choose from...


Yea and they are very expensive too


true. Et 20 wheels are few and far between. all depends if you want lightweight wheels or not.

Gotta say your car is looking good though.

What wheels would you be going for in the long run then?

Ash


I really don't know man but I will think about it and I will do alot of resarch before I get any wheels  
A20 LEE

very nice.
Nez

Ash the rims you have ET20 are you using wheel spacers with it too? or you don't know wheel spacers with ET20?
Ash25

Nez wrote:
Ash the rims you have ET20 are you using wheel spacers with it too? or you don't know wheel spacers with ET20?


to be honest i cant remember if they are et20 or not! i think they are, i am sure its on my build thread somewhere, i will check in a sec.

i also have 8mm spacers on all round as well to push them out just that little bit more. the car is sitting higher than lots on here as the speed bumps are massive and the roads are shite in liverpool!

Ash
StumpyRS4

The OEM ET20 wheels can comfortably accommodate 10mm spacers (F+R) as mine has...
jimbo

love the colour. if i was to go for big spacers id get the type that bolt to the hub then you bolt the wheel to the spacer, it makes wheel changing a lot easier
StumpyRS4

Have to agree there Jim... A royal pain in the ass otherwise.
Nez

jimbo wrote:
love the colour. if i was to go for big spacers id get the type that bolt to the hub then you bolt the wheel to the spacer, it makes wheel changing a lot easier


The wheel spacer's are Hub type  
StumpyRS4

So they should be, but makes life alot easier if they were either bolted to or stuck to the hub rather than coming off with the wheel each time you took the wheel off...

Double-sided sticky tape me thinks.
Nez

StumpyRS4 wrote:
So they should be, but makes life alot easier if they were either bolted to or stuck to the hub rather than coming off with the wheel each time you took the wheel off...

Double-sided sticky tape me thinks.


Will ask Ainde if he can do anything with it
m14rrv

when you getting it back nez
Nez

m14rrv wrote:
when you getting it back nez


By sunday hopefully  
quattronutter

nearly finished


philws4

Wow, Looks awesome  
Alps

StumpyRS4

Yep, defo needing BIG spacers!
JohnnyB

Looks good Nez I like the colour. Does need some bigger wheels to complete the look. Good work.
StumpyRS4

Good job Aiden...
MarkB

quattronutter wrote:
nearly finished


and mine next  

Looking good... any pictures of the rear?
quattronutter

MarkB wrote:
quattronutter wrote:
nearly finished


and mine next

Looking good... any pictures of the rear?


il get some pics of the rear tomorrow,in progress mark,bit hectic at the moment as im moving to new premises
Nez

JohnnyB wrote:
Looks good Nez I like the colour. Does need some bigger wheels to complete the look. Good work.


Will get some 20mm wheel spacers and it should do the trick  
Nez

OK guys car was collected from Aidan on Tuesday  and went striaght to car wash for full service in out and I also fitted two new tyres 245/40/18 with 20mm wheel spacer's so here are few pictures








Full tracking done with two rear tyres 245/40/18 and 20mm wheel spacer's





















More pictures to come
StumpyRS4

Got a missing centre cap from your front nearside wheel?  Gonna get them colour-coded?

Also thought about a different colour for your brake calipers?  Not sure they go well with the body colour?

Much better with the spacers though... Happy Chappy no doubt.
R5OTV

Car looks great, good job..
jaytee

Nice, well done
mikey-s

That's a great colour... much better in the flesh than in pictures. Nice job!
Matt_D

Looks nice Nez you must be well happy

Get those centre caps colour coded asap though
dan yeates

Awesome, nice job. Love the colour
Nez

StumpyRS4 wrote:
Got a missing centre cap from your front nearside wheel? Gonna get them colour-coded?

Also thought about a different colour for your brake calipers? Not sure they go well with the body colour?

Much better with the spacers though... Happy Chappy no doubt.


I bought the geniune Audi Rs4 centre caps but they don't fit into my rims as the rims are rep so now I am looking after a rep centre cap and I like the colour of the breaks
MilkybarKid

Lovely car mate! Love the colour, wasnt sure either until those last shots outside.
quattrokid

THATS STUNNING !!!

great effort there and a big pat on the back to Aiden.

by the way.... has the car got a new reg plate?  all the early phots shows it clear as day..... then the last phots outside when its finished the plates are masked off !!

nice looking car... well done!!
ollys

Nez wrote:
StumpyRS4 wrote:
Got a missing centre cap from your front nearside wheel? Gonna get them colour-coded?

Also thought about a different colour for your brake calipers? Not sure they go well with the body colour?

Much better with the spacers though... Happy Chappy no doubt.


I bought the geniune Audi Rs4 centre caps but they don't fit into my rims as the rims are rep so now I am looking after a rep centre cap and I like the colour of the breaks


If you want to sell me your original caps - please pm me?

Car looks great BTW - love  the colour  

Olly
dest

I saw your car at Aiden's last week, looked awesome!
Nez

Thanks guys for all the comment's car will go to Aidan again on sunday for full polish as the colour needs abit of job and after that I am off to Sant pod for GTI Show
sparkyvw

Wow looks amazing. Prob one of the best if not the best rs4 bodied sedans. Colour really really works well even better then the white ones.
Alps

Now for some colour coded or black/carbon mirrors, smoke tints, black the bonnet grill and 19's

Absolutely lovely car mate.
m14rrv

well mate what a great car, not a word to discrbe it aprt from wow
si_hill

Nez wrote:
StumpyRS4 wrote:
Got a missing centre cap from your front nearside wheel? Gonna get them colour-coded?

Also thought about a different colour for your brake calipers? Not sure they go well with the body colour?

Much better with the spacers though... Happy Chappy no doubt.


I bought the geniune Audi Rs4 centre caps but they don't fit into my rims as the rims are rep so now I am looking after a rep centre cap and I like the colour of the breaks


You can trim the rear of the oem caps to fit replica rims, just need a sharp knife. I have these fitted to mine.
JohnnyB

Nice one Nez looks bang on now youve spaced the wheels out.
Nez

Alps wrote:
Now for some colour coded or black/carbon mirrors, smoke tints, black the bonnet grill and 19's

Absolutely lovely car mate.


Lol not cup of my tea man   but smoke tints yes  
Nez

si_hill wrote:
Nez wrote:
StumpyRS4 wrote:
Got a missing centre cap from your front nearside wheel? Gonna get them colour-coded?

Also thought about a different colour for your brake calipers? Not sure they go well with the body colour?

Much better with the spacers though... Happy Chappy no doubt.


I bought the geniune Audi Rs4 centre caps but they don't fit into my rims as the rims are rep so now I am looking after a rep centre cap and I like the colour of the breaks


You can trim the rear of the oem caps to fit replica rims, just need a sharp knife. I have these fitted to mine.


The size of the oem caps are smaller then the one I have on the rims  
Nez

JohnnyB wrote:
Nice one Nez looks bang on now youve spaced the wheels out.


Yea man wheel spacer's really made the car look good  
Nez

More pictures










Nez

Car is now with Aidan for a Polish and for some more paint work
Nez

Few more pictures



Nez

Get this baby from ebay for 117.50

AUDI RS4 B5 AVANT REAR BUMPER GENUINE WITH GRILL INSERTS AND REAR SUPPORT BAR.





Now I am just waiting for Aidan to fit it  
KuB

you need RS Bumper without foglights like this !
Nez

[quote="KuB"]you need RS Bumper without foglights like this !

I am trying to get the fog lights for my bumper  
       AudiSRS.com Forum Index -> Projects and Builds Page 1, 2, 3, 4, 5, 6, 7  Next
Page 1 of 7